Is this true? In other words, the volume of a mono sound played on a single speaker will be amplified more than the same panoramic sound in the center that is played on both speakers. This is most likely because the stereo information in the tracks is higher than the information in mono. For example, if you have a synthesizer with higher stereo information than in mono, this may be the case. You can then distribute them throughout the stereo field or the stereo image by moving the audio to the left, right, and center.
Try setting the levels so that everything sounds loud enough in mono, and then switch to stereo to adjust things if necessary. That's what happens if you have sounds that have a lot of stereo information but not that much in the center. It's important to note that some listeners will be using smartphones or other mono playback systems. For example, some stereo mixes may include audio elements that can only be heard on the left or right side.
Mono playback systems use a single speaker and have the ability to create a two-dimensional representation containing depth and height. We explain the differences between mono and stereo audio and discuss which type is best for recording and playing back. But if you have a stereotypical sound system and you try to play mono sounds, then it will play in dual mono mode. Try the free Ozone imager from iZotope, it's an excellent stereo control connector and the stereo measurement is top notch.
But keep in mind that the playback will take place in dual mono mode, in which the audio signal is simply duplicated and played simultaneously on the left and right channels. The reason behind the same dB level of both is that, although Mono contains only one channel, it produces the equivalent sound of the left and right channels of the Stereo signals.
Leave Message